Friday, August 31, 2007

DIY: Black Straws Snoot Grid (Colored)

StrawsSnootsWColor_007This will be the last post of this month and with it I would like to make an improvement to something I had already built.

I already changed the normal snoots (Part 1 and Part 2) to colored one's so now it's time to make the same with the famous Black Straws Snoot Grid.

Some people have been asking about if colored straws would not do the trick but then again you will be stuck with that specific color in your bag and there aren't too many straws with nice colors unless you would want some green or orange fluorescent on somebodies background or head.

Anyway this will be a complement of the DIY: Black Straws Snoot Grid (Part 1) and the DIY: Black Straws Snoot Grid (Part 2) I posted.

I will not post the assembly here again, instead I will only show you what I have changed from the previous one.

And remember if you would like to have the Lee filters attached to your flash without having to worry with Velcro and at no cost just take a look at DIY: Lee Filters Flash Adapter.

Starting out with a new one I decided to make this one a little bit longer, so instead of having 5cm long I raised it 1cm more so it will handle better the insertion for the Filter Gel.

The measures are the same except the length for the 580Ex (I noticed that they will also fit on the SB-26):

1cm, 4,5cm, 7cm, 4,5cm, 7cm and length 6cm and straws 2cm length.

StrawsSnootsWColor_001StrawsSnootsWColor_002

You get the ruler and while peaking at inside to see where the straws end (mine were at about 3cm from the edge) you mark the cutting line. This will be where the Filter Gel will enter.

StrawsSnootsWColor_003

With a sharp knife or something sharp you will cut from bottom to top like on the above image. Just remember to cut on the side where the box is not glued, this way would be easier to pass the gel in.

StrawsSnootsWColor_004StrawsSnootsWColor_005

As you can see this is a simple way to do it. If you have already made one of this Snoots then you just have to cut it in and you are rockin'.

Do not worry about those straws that are not covered with the Gel, after you inserted the flash, they will not catch the light anyway.

StrawsSnootsWColor_006

Can you see it working with a nice Violet color??

Wait... I have some more for you!

StrawsSnootsWColor_008StrawsSnootsWColor_009

Now let's wrap it up to look more "Professional".
PAY ATTENTION to the hole. DO NOT under any circumstances cover the hole with tape or else you will end up with tape on the Gel Filter ruin it and we don't want that, RIGHT!!

StrawsSnootsWColor_010

I changed the Color from Purple Rain to some kind of Tequila Sunset Red. COOL!!!

Now let see what we can do when we hire a Professional model for the job :)

StrawsSnootsWColor_011

Professional Model with Black Straws Snoot Grid Colored on the background.

Hey let's lit the guy ;)

StrawsSnootsWColor_012

Hey, Hey, Hey let's wait a minute how did I end up here ??

The photographer sucks, look at the background light it almost vanished and he just put so much light on me... broad day sun ;)

Oh well, it looks like when you wanna do both things at the same time neither will come right just look at my smiling face :)

StrawsSnootsWColor_013

For the last of the sequence the setup shot.

Canon 580Ex camera left with the Black Straws Snoot Grid Colored 1/4 at 105mm, SB26 camera right shot through the white umbrella 1/2 at 14mm.
Camera ISO 100, Tv200 and Aperture 9.0.

Thanks to all for the support and stay tuned for more good stuff.

Also take a look at these:
DIY: Black Straws Snoot Grid (Part 1)
DIY: Black Straws Snoot Grid (Part 2)

More: Full Post and Comments...

View Blogs reaction

Tuesday, August 28, 2007

New method to resize your images

I was navigating on YouTube reading the news and BANG!!!

My eyes were drawn into this video of this new technique for resizing images from Dr Ariel Shamir and Shai Avidan of the Efi Arazi School of Computer Science.


SIGGRAPH is a new method of image resizing looks for seams (not simple columns or rows) of pixels with the 'least energy' (least contrast / change in detail) both vertically and horizontally in the image and then uses this to enable resizing without losing important image content such as human subjects or other detail. This technique can be used for reducing and enlarging images as well as removing items from the image which are not wanted (by manually painting 'negative weight' over an area of the image).

Just take a look at the video and AMAZE yourself.

One of these days we will see this implementation on Photoshop or some other software, this will make a BIG improvement on the way we will treat and see our photos.



Wanna know more? Just check the links below.

Click here for Dr Ariel Shamir's home page

Click here for (20MB PDF file) information on this technique

Rui

More: Full Post and Comments...

View Blogs reaction

Monday, August 27, 2007

DIY: Very Cheap Backdrop holder for Your Room or Living Room

Very Cheap Backdrop holder for Your Room or Living Room
I'm back with a new idea I got during one of my visits to a local IKEA store.

I got this great idea for a backdrop to your room or even for your living room.
This simple piece is sold by IKEA and you can get it at different stores around Europe and even in the US you just have to choose your nearest store and search the items for the DEKA product.

You can attached it to the wall or to some high entertainment armoire or wardrobe.



Here is what it will look like after you have put in with hooks attached to the wire.



Then you just have to hook it to any backdrop or muslin you have.



And this what it will look like when you have all done.



You do not have to put it like this. You can put it on a wall and while not in use you can hang some photos on the hooks.

There's also a great link I would like to mention if you want to create a Light Box/Light Tent using inexpensive tubes from Bill Huber and a Flash presentation by Kevin Criscione.

Thanks to all for the support and do not forget to subscribe to Lighting Mods at Flickr for some new DIY stuff from other readers too. Very good stuff people have been posting just check them out.

Credits of the original posting of these photos by "From The Fence Post".

If you have made some building setups please share them with us!!

More: Full Post and Comments...

View Blogs reaction

Sunday, August 19, 2007

Lighting in a Cage

You should be wondering why the hell his this guy is talking about Position of the Light again when he already talked extensively on another post "Position of the Light étude"?

Well this one you will love it as a carry around weapon and as a mental reminder of - where should I put my light? Visualizing the the instant effect it will produce on the model would put you with mouth open. :), So let's play...

It's been a long time since I'm a member of the PhotoWorkshop.com and a lot of good stuff are coming up on their site just take a look around and if you like it join in.

Unfortunately not everyone got to subscribe it. They got a lot of videos and great composition techniques and also weekly assignments and the after review which I think is a great feature and very helpful.

Another thing that came into my attention, last year, was a diagram they have created to show you how light works from different positions and that I keep with me all these time for lighting reference called Light Cage.

You can simulate lighting a person from 45 degree in 3 different levels and with different light settings and also with a fill light if needed.

This year that have changed the Light Cage to a bigger version but I kept with me the flash videos of the older version and now it's time to share them with you all.

You can see the effects of each Light Cage just by moving the mouse around and then replicate it, or improve it, with the stuff you got. You do not need to have studio lights you can try the settings with your small strobes too. A la Strobist way!!

For the all set I created a special link to my personal site or you can simply click on each image to link to it. On the right side of the blog I created also a link to the page for later reference.

The first one I would like to share is a flash movie for the lens aperture.

This cool feature shows you how it works on different apertures just move the cursor over the f-stop and voilá.

The first light cage is the biggest and improved version over the other one's since now you have the possibility to make it with a fill in case you are working with it .

Makes the Light Cage very interesting to play around with since you can put the cursor over the positions and looking at the model to get an example of the light at that position.




This Light Cage shows you the effect of a normal hard light pointing at the subject.






With this one you cans see the effect of the light with a soft box making it softer.




And the last one shows you the light with the same softbox but this time if you press the mouse over the point source you will get a nice fill light to complement.


You do not need to have a naked model to make this ;) you can try them with any thing you like.

Also if you open them side by side you can see the difference between each one of them.

Until next time go play with your lights !!

More: Full Post and Comments...

View Blogs reaction

Friday, August 17, 2007

Crazy, but kids and friends Will Love it!

Craziest idea for using the on camera hot shoe and still take some great pictures by using the flash off camera.

This way, for sure, you will have to use it off camera and get even better results.

If you are wondering what this is all about check it out. It came with assembly instructions included :)

-------

Mail from Federico Sartorio about this Crazy Little Thing Called PEZ.

Hello!

Tired of being unable to take good photos of your friends / kids? Here's my tutorial on how to create the cheapest and wackiest hot-shoe attachment for your camera.

First of all, buy a PEZ sweet dispenser in any grocery store (they are sold everywhere in Europe, I hope they are in the USA too). The more ridiculous, the better. [fig. A.]. The base ("feet") of the dispenser should look like this [fig. B.]


The boxed dispenser and its "feet"

Now, using a cutter, trim the feet of the dispenser [fig. C.] leaving a 2-3 mm wide plastic strip on each side [fig. D.] Check the width of your camera's hot shoe if you are not sure. And avoid trimming your fingers.


Trimm
ing the base

Slide the dispenser in the hot shoe of your camera, it should fit naturally! [Fig. E.] And its sweet-dispensing capabilities are retained! Yum! [Fig. F]


Mounting the attachment

Now you are ready to shoot! The best use for this attachment is to make people laugh and quickly snap a joyful portrait of them. You can then reward them with a sweet for added happiness. I've tested it on kids and friends and it works most of the time!


My nikon F-100 equipped with 105 2.5 Ais and the infamous PEZ dispenser

If you are not satisfied with the result, try using a different dispenser. The one you chose might not have been ridiculous / funny enough.


Three items of my "collection". Timon (far right) is my personal favorite.

All pictures and text by Federico Sartorio
-------

This is the funniest as it can get.

I don't know if this will work with kids or other people since I did not tried it yet but at least one thing is sure, you will not attempt to use the flash on the hot shoe, maybe this way you can start learning how to use it off the camera.

Think positive - you will look a little ridiculous and people at least would stare at you and Smile ;)

Until then get some time to check my Flickr group there are also some guys posting great stuff there.

More: Full Post and Comments...

View Blogs reaction

Thursday, August 16, 2007

DIY: Snoots with Color (Part 2)

Snoots with Colors (Part 2)As promised here is the part 2 of this DIY: Snoots with Color project.

I have already spoken about Snoots on a previous post and have made them with straws to create a grid, this time I removed the straws and add some color to them by making a way of putting the gels inside without messing too much with the design of what you already know or have.

A lot of you out there may already have made them based on what you have read on Strobist... GOOD!!, now let's see what are the results for each one of them with a couple of pictures to better illustrate.


Snoots with Colors (Part 2)_01

(L to R) 28cm, the BIGGEST one, produces the smallest light, the 22cm is not so bigger than the 16cm but for some things it could come in handy and the 16cm is the smallest of them all and the most portable.

I tried to put all of them on the same direction and position to the white wall and also tried to put in the same amount of light for comparative purposes between them.

Snoots with Colors (Part 2)_02

I moved the strobes a little bit, from the front of the light, so you can better compare the size of each one of them against a white wall.

You also have to take in account that when you are shooting, some object or person, the light will be a little boxed when in close range as you can see from this simple image.

Snoots with Colors (Part 2)_03

I now colorized one of them (16cm) with Gold Amber #21 from the Lee filter sample package. Notice that is no white spill on it.

I believe this is one good way to make the snoots having some color without loosing too much your head or trying to pickup something to hold them in front of the snoot at last minute.

Let's colorize another one.

Snoots with Colors (Part 2)_04


So from Left to Right we have 28cm with a Velvet Green #735, 22cm with no filter gel and the 16cm with Gold Amber #21.

This is what could be accomplish with the Snoots with Color. You can use them normally with white light coming from the flash and then put in any color you like from the Lee filter gels sample packager.

My Gear - What you wanted to know but were afraid to ask_007

The final shot I created for this was a very simple one using the 3 small strobes so you can get an idea of what I was talking about.

Snoots with Colors (Part 2)

The model was the best money could bought at the time but I think it did a pretty good job concerning that he had to be running back and forward to tune the lights, grab the book, take the picture and smile :)

Last but not least for all you guys here is the setup shot.

Snoots with Colors (Part 2)_05

(L to R) SB26 with 16cm snoot, Gold Amber #21 Lee filter gel 1/16 at 85mm to background, Canon 580ex 1/128 at at 105mm pointing at the models face and SB26 with 22cm snoot, 1/64 at 85mm and Velvet Green #73 Lee filter gel pointing at the book. All flashes triggered with Gadget Infinity system and model digitally removed ;)

You can click on the picture to see some Flickr notes I've added to the photo.

Bottom line... In my experience the 28cm snoot really becomes 24cm in size since for it hold on to the flash head you have to put it in 4cm. For this shots this did not happened since I manage to hold it on the flash with no problem, but if you are using it outside on an assignment this can become a problem since the Snoot keeps falling to the flash front.

So, unless you really need it to illuminate something specific, keep it out of your regular gear since the 16cm and 22cm make a great job.

Besides this minor issue it works like charm. The changing of the gels is so quick that the model would not notice it and with a little usage you can even make it with yours eyes shut... or maybe not ;)

Thanks to all for the support and for reading it.

If you missed anything take a look at the first part here goes the link to it:

DIY: Snoots with Color (Part 1)

Stay tune for more cool stuff subscribing the Lighting Mods blog.

More: Full Post and Comments...

View Blogs reaction

Saturday, August 11, 2007

Top 10 Lies told to Naive Photographers, Artists and Designers

Monsters Of Rock (Zaragoza-Spain 2007)_060Today I was doing some peaking around and came to my attention this brilliant article by Mark W. Lewis that showed me some of the errors I have done in the past and let me wonder - what if I knew this before I accept the job?

The examples presented here are the most common ones used by almost any person and in any language... believe me and I speak a couple of them.

So read it carefully since you could eventually come across one of these situations if you do not pay the right attention.

I transcribed the full article to here so you can better read it fully.
This is the the kind of things that sometimes you are so excited you have got the work that you don't even think of them or with so many things to think of you left them behind.

So above all beware of the Sharks.

Top 10 Lies told to Naive Photographers, Artists and Designers

1 "Do this one cheap (or free) and we'll make it up on the next one."
No reputable business person would first give away their work and time or merchandise on the hope of making it up later. Can you imagine what a plumber would say if you said "come in, provide and install the sink for free and next time we'll make it up when we need a sink." You would be laughed at! Also the likelihood is that if something important came along, they wouldn't use you.

2 "We never pay a cent until we see the final product."
This is a crock, unless the person is leaving the door open to cheat you out of your pay. Virtually every profession requires a deposit or incremental payment during anything but the smallest project. Once you have a working relationship, you may work out another arrangement with a client. But a new client should not ask you to go beyond an initial meeting and, perhaps some preliminary sketches without pay on the job!

3 "Do this for us and you'll get great exposure! The jobs will just pour in!"
Baloney. Tell a plumber "Install this sink and my friend will see and you'll get lots of business!" Our plumber friend would say "You mean even if I do a good job I have to give my work away to get noticed? Then it isn't worth the notice." Also the guy would likely brag to everyone he knows about how this would normally cost (X) dollars, but brilliant businessman that he is he got if for free! If anyone calls, they'll expect the same or better deal.

4 On looking at sketches or concepts: "Well, we aren't sure if we want to use you yet, but leave your material here so I can talk to my partner/investor/wife/clergy."
You can be sure that 15 minutes after you leave he will be on the phone to other designers, now with concepts in hand, asking for price quotes. When you call back you will be informed that your prices were too high and Joe Blow Design/Illustration will be doing the job. Why shouldn't they be cheaper? You just gave them hours of free consulting work! Until you have a deal, LEAVE NOTHING CREATIVE at the clients office.

5 "Well, the job isn't CANCELED, just delayed. Keep the account open and we'll continue in a month or two."
Ummm, probably not. If something is hot, then not, it could be dead. It would be a mistake to *not* bill for work performed at this point and then let the chips fall where they may! Call in two months and someone else may be in that job. And guess what? They don't know you at all.....

6 "Contract? We don't need no stinking contact! Aren't we friends?"
Yes, we are, until something goes wrong or is misunderstood, then you are the jerk in the suit and I am that idiot designer, then the contract is essential. That is, unless one doesn't care about being paid. Any reputable business uses paperwork to define relationships and you should too.

7 "Send me a bill after the work goes to press."
Why wait for an irrelevant deadline to send an invoice? You stand behind your work, right? You are honest, right? Why would you feel bound to this deadline? Once you deliver the work and it is accepted, BILL IT. This point may just be a delaying tactic so the job goes through the printer prior to any question of your being paid. If the guy waits for the job to be printed, and you do changes as necessary, then he can stiff you and not take a chance that he'll have to pay someone else for changes.

8 "The last guy did it for XXX dollars."
That is irrelevant. If the last guy was so good they wouldn't be talking to you, now would they? And what that guy charged means nothing to you, really. People who charge too little for their time go out of business (or self-destruct financially, or change occupations) and then someone else has to step in. Set a fair price and stick to it.

9 "Our budget is XXX dollars, firm."
Amazing, isn't it? This guy goes out to buy a car, and what, knows exactly what he is going to spend before even looking or researching? Not likely. A certain amount of work costs a certain amount of money. If they have less money (and you *can*) do less work and still take the job. But make sure they understand that you are doing less work if you take less money that you originally estimated. Give fewer comps, simplify, let them go elsewhere for services (like films) etc.

10 "We are having financial problems. Give us the work, we'll make some money and we'll pay you. Simple."
Yeah, except when the money comes, you can expect that you will be pretty low on the list to be paid. If someone reaches the point where they admit that the company is in trouble, then they are probably much worse off than they are admitting to. Even then, are you a bank? Are you qualified to check out their financial? If the company is strapped to the point where credit is a problem through credit agencies, banks etc. what business would you have extending credit to them. You have exactly ZERO pull once they have the work. Noble intentions or not, this is probably a losing bet. But if you are going to roll the dice, AT LEAST you should be getting additional money for waiting. The bank gets interest and so should you. That is probably why the person is approaching you; to get six months worth of free interest instead of paying bank rates for credit and then paying you with that money. Don't give away money.

Now, this list wasn't meant to make anyone crazy or paranoid, but is designed to inject some reality into the fantasy.

You are GOING to be dealing with people who are unlike yourself. Their motivations are their own and their attitudes are probably different than yours. There are going to be demands, problems, issues and all the hassles that go with practically ANY work/job/money situation. Too many times I see the sad example of someone walking in to a situation with noble intentions and then getting royally screwed, because what they see as an opportunity and a labor of love, the other party sees as something else entirely, not at all romantic or idealized, but raw and simple.

How can you deal with this stuff and still do good creative work? Good question. THIS is why an education is important. You learn, out of the line of fire, how to deal with the art at it's own level and also how to deal with the crap that surrounds it. You may have tough teachers and think that it can't be worse, but wait until a business person has a hundred grand riding on your art! Then you will know what "demanding" means. You will then thank all those tough teachers for building up the calluses that enable you to enjoy the job rather than just feeling like it is all a big waste of time!

In the end, working commercially, being a terrific artist is about 25% of the task. If that is the only part of the task that you are interested in, do yourself a favor. Don't turn "pro."

Keep up the good work and enjoy the weekend.

Rui

More: Full Post and Comments...

View Blogs reaction

DIY: Snoots with Color (Part 1)

Snoots with Colors (Part 1)_01Welcome back to another DIY.

I know that you already missing some DIY here so here goes a great one.

I grabbed David Hobby last year's idea for building a cereal card box snoot at his Strobist blog and decided to take it a step forward towards coloring them.

This will be a two part set with me covering on the first part how to build your snoots, with no effort , from any cereal card box, as if you do not know this already, but this time I'll take you to coloring the lights with them using the Lee filters small pack gels.

They will continue to be the good old carry on, even if you loose one you can get home and make another one, but these one's will be colored.

For those of you who do not know what I'll be talking about take a moment...

STOP!!

... and read some of these example articles that David Hobby wrote before you continue, this way you'll get an idea what is a snoot and what you can accomplish if you build one.

- On Assignment: Spring Arts Guide

- Developing an Idea, Part One

- Developing an Idea, Part 2: Compact Fluorescent Bulb

- DIY Macro Strip Lights

- On Assignment: Blind Snoot Portrait

- On Assignment: Pool Portrait

- On Assignment: Flavored Vodkas

- On Assignment: Simple Wall/Snoot Portrait

AMAZING isn't it ?!!!

Well at least that's what I thought when I read it for the first time... so stop being lazy and gather your stuff to build one here's how:

First I will start with the setup light I used to take all these shots.

Snoots with Colors (Part 1)_02
On camera left, a white umbrella with a Nikon SB26 through it at 1/6 to get a nice bright light.
Camera settings for this was Tv200, Av8.0 and ISO100.

What you will be needing:
- 3 Cereal card boxes ( I got 2 from the same size and another a little bigger).
- Scissors
- Glue
- Ruler
- Pen
- The Flash you will be using for measures and try out later
- Lee filters or any other sample package you have and try out later
- Some patience...

Snoots with Colors (Part 1)_03Snoots with Colors (Part 1)_07

First things first. Draw the measures on the card.

For the 580Ex (L to R) 1cm, 7,3cm, 4,3cm, 7,3cm, 4,3cm
For Nikon SB26 will be 1cm, 7,3cm, 4,5cm, 7,3cm, 4,5cm

And since this will be the small of the three I have chosen the 16cm of height.

Why 16cm and not 13,5cm or 11,656cm? - You may ask

First because it will be easier to carry, second you have to count with at least 2cm for the flash head to enter and be steady (so it will be 14cm) and last but not less important the size of the box since the one I had available was from that size... :)

Well you can make them at any size based on what your needs are. I will come to this on part 2 of this DIY.

Snoots with Colors (Part 1)_05

See, on the above picture, that my index fingers are pointing at the card well this is the already made bending part of the box.

When I made the measures I took the available space on the cereal card box to make it fit into the drawings of the snoot, pay attention to this when you build yours or at least choose a box that fits on your drawing measures since this will save at least bending 2 more parts ;)

Snoots with Colors (Part 1)_06

This is the picture of the drawing for the snoot 22cm with sizes as above only the height is 22cm.

Snoots with Colors (Part 1)_08

And here for the third and last one of the series the MEGA snoot 28cm with sizes as above only the height is 28cm. I always wanted to make and try one of these...

Snoots with Colors (Part 1)_04

Now get the scissors and start cutting them out of the cereal card box, nice and easy.

Snoots with Colors (Part 1)_09

With the help of the ruler start folding them inside so it will help shaping the box.

Snoots with Colors (Part 1)_10

A little glue, on the 1cm part, to hold the box together.

Snoots with Colors (Part 1)_11

And "voilá" we got the first cereal snoot assembled, cool, fast and simple. ;)

Snoots with Colors (Part 1)_12

On top the 16cm and on bottom the 22cm... now let's work on the BIGGER one and I will post next a side by side of the three so you can get a visual idea.

Snoots with Colors (Part 1)_13

Quickly I finished it and here it is a picture of the "CORNFLA" colored cereal box ;)

Snoots with Colors (Part 1)_14

Enjoy the three of them align together. See when I meant BIG?

Until here nothing was new (for the people who were building this cereal card box Snoot for some time now).

Next comes the interesting part...

I've been scratching my head for quite a while now and wondering a way to make the cereal card box Snoot hold a gel filter.

- Tried to put some Velcro at the end of the Snoot like I did on the flashes, this way I could attach the same gels I was using on them. Attempted FAIL!!
Simply because this would led me to Velcro all the gel filter colors I would need to use... but then again what if I needed a Ultimate Violet ref.707 color on one snoot and a Velvet Green ref.735 and all this while on location with no way to attach or get some Velcro?

Damn S"#$&, why this had to happen now that I have carried all the stuff I was going to need for the assignment, how could I missed this...!!!

- Tried to make a hole at the end part of the flash like I did on DIY: Lee Filters Flash Adapter, this could make a point, but then again FAILED!!.
This was a good idea except that when you make the hole, on the end part of the Snoot, for the gel to get in it will not stay aligned with the inside flash because the flash diameter would make the Snoot wider than the 4cm gel and the white light will spread mixing it with the colored gel.

- I also tried to make a box wider on one side, where the flash will get in, and on the other side cut it the size of the gel. FAILED!!
The box would not be very stable since it was not holding the light for a steady position and will cause the box not to be completely square, it was having a strange shape and the glue, after some use, would start to come out.

After trashing a couple of boxes trying to figure it out a way of making this to work and spending almost a week testing out...

YUUUPPPIII, I DID IT!!!!!!

Let me show you how simple it is:

Snoots with Colors (Part 1)_15

On one side of the box you measure 2cm (this for the 580Ex or you can feel the flash end with the tips of your fingers and measure there) from the end side of the box you will want to use the gel (see image above) then you mark that with a pen.

Snoots with Colors (Part 1)_16

Pay attention to the above picture because you will want to make the cut on the clean part of the box, do not make it on the 1cm glued part since this will be more complicated to slide the filter gel afterwards.

Snoots with Colors (Part 1)_17

Next, remove the flash from the snoot and make a clean cut from top to bottom.
DO NOT cut any inside parts of the box except the one mentioned!!

Snoots with Colors (Part 1)_18

See how it will look like after you inserted my old Lee filter gel that I generally use for testing purposes.

Snoots with Colors (Part 1)_19

View from another side.
Here you can actually see how the hole of the gel filter tip will keeps out after inserting the all filter gel. This option is very good in case you need to change it quickly with another one or none.

And you may ask at this point... Will it work? - YES IT WILL WORK!!!

Pay attention to the next image.

Snoots with Colors (Part 1)_20

Here you can see it working and with this technique you can even adjust the filter to cover the all flash head since the filter gel will be very near the flash and you can push it inside for better adjustment.

Snoots with Colors (Part 1)_21

Here is a quick simple example with a blue Lee filter gel put in giving you a complete blue color.

After we've finished cutting and gluing everything is time to give a cover to our boxes.
We do not want our fellow photographers to think we are not professionals or people on the street looking at us with a weirdo look ;)

Snoots with Colors (Part 1)_22

So 30cm (more or less) of Gaffer tape will be enough for a complete turn around the snoot so it will look very professional.
Start on the part of the Snoot that does not have the hole and leave that for last... this will be explained why a couple of steps further.

Snoots with Colors (Part 1)_23

Do it like this smoothly so it would not turn in with any wrinkles...
The wrinkles you see on the image are the joined pieces of tape.

Snoots with Colors (Part 1)_24

This should be the last part to add tape since you CANNOT cover the hole with tape.

I repeat you CANNOT cover the hole with tape!!

Because if you do you will damage the filters since the Gaffer tape's glue will be passed onto the filter as soon as you put in through the hole... so once again DO NOT cover the hole with tape!!

Cut a little piece of tape and cover around the hole like you see on the image.

Snoots with Colors (Part 1)_25

Here are the final trio with some tape on them. Doesn't they look like a professional tool, or whatever that means.

Now that you make it this far also take a look at my best "selling" DIY: Black Straws Snoot Grid (Part 1) and DIY: Black Straws Snoot Grid (Part 2).

You can also apply this color example filter insertion to the Black Straws Snoot Grid. The only thing you need to add to it's construction is the small hole on the side so that the gels could get in and color the straws.

On the Black Straws Snoot Grid you can make them with different color straws but, from my point of view, the only issue is that you will have to stick with that color and again carry a lot of this things on your bag when you decided that Loving Amber ref.176 was the right color... get it?!!!

Hope this could help you guys out as much as it is helping me on the field.

Stay tuned for the DIY: Snoots with Color (Part 2) in a couple of days where you can see an example on how you could use this to make your photos shine as well as the effect of each one of them.

Greetings to all,

Rui

Snoots with Colors (Part2)

More: Full Post and Comments...

View Blogs reaction

Tuesday, August 7, 2007

Light Painting on Vacations

Painting with Light_01Well it seems that the good days were over.

Back into Luxembourg and after almost 40 degrees in Croatia and a lower one's in Munich here the weather is not so good.
It looks like winter times have come in August, the weather is no longer the same as in the old days where they were almost fixed and now one day is summer the other is winter... what are we doing to the world :(

Anyway, I decided to pickup where I left, on the last post, and bring you some more cool stuff you can do with only your small strobe and also on vacation ;)

As we all know vacations are vacations and you're wife will tell you, almost of the time what to do, and keeps pushing you out "why did you bring the damn camera, aren't we on vacations?". Well if that happened to you you know what I mean, if not be prepared.

On vacation I usually travel light with my Powershot G6 but this time decided that I wanna to make some good photos and some good HDR (later on Flickr) and since I never been to that place why not carry a little more gear and take also the tripod, and again my wife complained (TRIPOD!!!).

Well enough of this bla, bla, bla thing and back to what I want you to see.

In the island of KRK photographic matter are everywhere from the beach to public places the people are nice and the weather helps also the light there is amazing the colors are so rich and the tones very nice.

One of those nights I went into the pear to make some night scenes and decided to use the flash on something different.

So I set the camera on the tripod, ISO 100, AV 9.0 and TV 15s and shoot the great sky at the marina.

Well... the shot did not came so good since it looked like so many others I've seen on some postcards they have there.

With Strobist in mind and after making my first try on Light Science and Magic book i decided to give it a live shot.

Grabbed the 580Ex popped up a couple of times to test how much light will be needed to fill what I wanted and this is what came out.

Painting with Light_01

Well I set the flash to 1/64 after several manual tries. I was popped manually for better control of what I wanted to illuminate. Also got some details on the other side on the docks.

The tourist were admiring the chimp (Me) from the other side of the pear while I was running from one side to the other with my 580ex on the hand painting the boats ;) cool.

Thank god my wife was at the rented apartment or else she would have laugh to.

Painting with Light_02

Setup shot is this one. You can still see me on the left side chimping ;)
This was a difficult to get focus on the boats since there were a lot of movement on the pear water and the boats would not stop for a moment, but I think I did I good and different capture.

The next shot I tried to put some people in it and balanced the WB to tungsten in order to get a stronger orange on the background and balance the tourists on the bench while they were admiring the BIG boat.

Painting with Light_03

Here is the setup shot:

Painting with Light_04

Since I was my assistant I had to run back and forward to and from the camera in order to get a clean shot and had to be careful so people would not leave their positions.

The settings were Av 5.6, Tv 1/3s and ISO 100. The flash was set to 1/128 and I was really very close to the people so the light won't spread too much into their fronts.

Hope that you make some great experiments with this technique that sometimes can save you in some difficult situations with parts of the photo with no light, also you get a different vacation photo.

Something com into my attention today while surfing around.
The subject is PHOTOGRAPHIC MEMORY and I was thinking I had a pretty good one until I saw this 2 videos from Stephen Wiltshire himself.




Take a look at them and take a minute to think how much information can your brain storage...

So go make yourself a favor and use it.

Until next time keep clicking,

Rui

More: Full Post and Comments...

View Blogs reaction