DIY: Umbrella Softbox Reinforcement

Hello 2015!! Hope you all have a wonderful year with lot's of assignments and great stuff to photograph.

It's been quite a while that I did not post anything here on the blog, time flies and so do things. The world spins so quickly these days that you almost do not have time to spare on something else than shooting and family. For me traveling been an easy and wild ride that most of the time I don't have a moment to spare with the blog and unfortunately started to be left behind

Well, enough of this and the post I bring you today is an easy one and I been planning on writing on this for quite sometime, that the time has come ;)

More and more I've been traveling for assignments and getting myself with the same dilemma: Travel=Lightweight.

This means less things to bring onto a shoot and travel lighter either by having a small camera and lenses or having to choose lighter lighting gear and all portable. So I decided to give it a go to my Umbrella Softboxes I had in the closet, first because they are easy to travel with and also very quick to assemble on location, you just pop them open like an umbrella and there you have it a self contained softbox.

My last acquisition was the Phottix 90x90cm with grid, man this thing is BIG (not bulky), very portable and not very expensive. Excellent for on location shooting and travel! Not a BIG MAMMA but BIG and good for portraits and small group shots.

The thing is, I had already noticed that the interior of this type of boxes were not well attached together and can sometimes cause it to have disruption at the metal parts, either by letting her fall on the floor by wind blowing, by mistake or simply by opening it up and closing it to many times.

The 4 tissue attachments that came in are not suffice to make this thing steady (I also noticed the same thing on some other different sizes Umbrella Softboxes from this same brand).
Well they hold it together great but if you make some heavy duty work with it then this DIY solution maybe something that you would like to consider done to yours.

It's simply adding some inexpensive Nylon Cable Ties to join the 2 metal pieces together. This way you will have a stronger softbox, just by doing this DIY (Do It Yourself) on all metal bars that hold the softbox together.

Let's see how: 

First what will you need to make this DIY happen:

- Wire Cutter
- 24x White Nylon Cable Ties  (200mm) 0,50€ a pack of 50

You can choose whatever color you want on the Cable Ties, I preferred the white ones so it can be neutral, since the background of the box is silver and because visually it pops less to your eyes ;)

Here is one of the 4 tissues that attach the metal bars together on each side of the softbox.

Here you have one of the Nylon Cable Ties firmly securing the metal bars together next to the tissue one. 

Grab the 2 bars together, here you have to take some attention for not letting the bars cross before you zip in the Nylon Cable Tie, otherwise you will end up with a distorted bar..

Zip in the Nylon Cable Tie and move on to the next. I zipped in 6 Nylon Cable Ties on each metal bar.

Here is the distance I've done of each Nylon Cable Tie near the top center shaft.

I did not push the zip too much on the closest to the center so it will not bend the metal bars. Tight it a little but not too much.

Here is another image of the distance between the first two Nylon Cable Ties.

Cut the long edge of the Nylon Cable Tie and you are ready to go.

Here is the final image of my box.

The Red circles are the Nylon Cable Ties I had and the Green ones are the tissued ones that came already in the box.

I used 6 Nylon Cable Ties on each of the 4 metal parts of the box. I think 6 will suffice but you are able to attach more if you want to.

By making this simple DIY you are making the 4 metal parts more rigid and durable since now they are secured to each other instead of floating around. 

Hope this would help you on getting a more steady Umbrella Softbox so it could last a little longer.

Until next post... stay safe and THANK YOU for the support!!!

DIY: Spring your batteries on Olympus OMD-EM5 Battery Grip Holder HLD-6

 

---//--- UPDATE 2014-06-24 ---//---

Received a call today from Olympus European Service Center that is located in Coimbra, Portugal and they have informed me, that after reading my DIY, that in fact there may be some kind of random grips out there that may miss the spring but they assure me that the Olympus Battery Grip Holder HLD-6 have in deed the spring at the bottom.

They asked me to return my Battery Grip Holder HLD-6 so they could apply the missing spring at no charge.

Once again KUDOS for Olympus on fast solving this issue and their excellent Service Center Support, just wish Canon was like this when I had several problems with cameras and lenses while on Platinum CPS.

If your Olympus Battery Grip Holder HLD-6 is missing the spring call it in so they can add it... meanwhile use the DIY as a rescue option.

---//---

It's been quite a while since I posted anything here on the blog... the lack of time has made me left out writing and DIY postings on the blog as well as some bumps here and there.

Anyway, today's post it's about something that have been annoying me for quite some time on my Olympus OMD-EM5 battery holder the HLD-6.

I do not know if this also happens to you or is a random case, I've never have report it to Olympus, that's a fact, but that's is very annoying it is.

Let me explain this... When I got the grip my batteries came out quite easily. I have some from Olympus and some from a "white" brand since they are much less expensive and can take the same charge as the branded ones also the chargers have a travel plug that easier to put in the bag than to have to carry the cable around.

After some travels and bumps the grip got some kind of a malfunctioning problem while sometimes it will work and others simply won't responded even after removing the batteries and putting them back on. So I send it to service and while still on guarantee Olympus service center (that is in Coimbra, Portugal) was kind enough to replace the bad parts and the service was so good that I recommend it greatly to anyone using their services. UPS will pick up and will deliver with a great service.

Things started to be a bit more difficult to remove the battery just when I got it back from the service center. It looks like the bottom metal plate is nor a little curved or not well positioned and the batteries are less easily removed. 

    

I now have to use a small knife to remove them because of how tight they are and has you can imagine this is a little bit difficult to do when on assignment.

So I decided to have a small paper clip with me and use it to remove the batteries, but sometimes even with the paper clip to help this can take sometime and when you and to be fast to remove the grip battery it can take forever and when in a dim light situation you can sometimes go crazy.

In order to fix this I decided to look why was this happening since when I bought the OMD-EM5 I never remembered this has ever happened and the battery after pressing the release button it will pop out so easily. 

 Here is the answer... the OMD-EM5 have a small spring inside near the battery connectors that makes the battery pop out when you press the orange release button.

 Hey!! no spring on the battery grip HLD-6, very strange has it seems to have some kind of attachment inside where a spring should fit easily. Could it be mine or Olympus simply forgot to put the spring inside the HLD-6? Fear Not Not I will teach you how easy is to make a replacement one for your HLD-6.

Here are some things you will need: 
- Scissors
- Some gaff tape
- Broken radio or a small spring
- Long tweezers
- Small spanner (to make a small hoke on the gaff tape)

So let's start. Remove the spring form the radio or other accessory you have at hand where you can get a small spring. In my case was this broken radio.

Here is the spring out of the radio.  

Here is the size in cm so you can have an idea of how small it is.

Now cut a small square of a gaff tape, more or less like so. This you have to take in attention has the room inside the battery holder HLD-6 has not a lot of parts where you can glue this to... so take that in attention but this was the size I cut mine.

With a small spanner I made a very small hole so that the spring can roll inside of it. Do not make a very big hole or the spring will not hold.

With the help of the tweezers I put the spring inside the hole and twist it a little bit so it won't come out so easily.

 

There you have it. 

 This is how much I have roll it in the back of the gaff tape.

Then with the help of the long tweezers I carefully glued it inside the bottom of the battery holder HLD-6. Use the tweezers to press the gaff tape to the bottom of the grip holder.

Now when you press the orange release button...

The battery will pop out has it does on the OMD-EM5.

Some things you have to take in consideration when making this DIY. 

The spring eventually will be loosen has the gaff tape will not hold the rest of the battery grip holder life. This is because the glue with the heat may come out and the spring will get loosen but until it does I'm pretty sure it will take a couple of months.

When popping the battery out always double check to see if the spring is still there and in the correct position before you put another battery in, this will help you on not having problems when that gaff tape start to loose it's magic ;)

Hope you enjoy this and I will tag Olympus on this post maybe they will have a permanent replacement, in the future, for this DIY fix.
I'm pretty confident that this will be very easy to fix at factory level since there is some kind of attachment already inside the grip but for unknown reason they are not using it and I do not see how a small spring could affect the price increase of the future grips.

Let's hope Olympus will service this and give us a small spring for our grips.

Thank you for following and hope you have enjoyed and if you make one just let me know how it went.

Stay safe,
Rui

Halo Problems on Canon Lens 70-200 L IS USM II - Canon Ignoring The Problem... and You?? Finally FIXED on Version III !!

Let me just start from the beginning...

I sold my 70-200 L IS USM II lens has it was used and needed a replacement, also was hopping on getting the "newer one" with the newer lens cap and a new serial number. In fact that was never an issue but my lens get so much use than from now and then it is better to sell them and buy new ones than to send them back to repair.

That was the case for this lens. It had a lot of mileage so it went in for Canon CPS Portugal to get a clean and was sold.

I ordered a new one and for my surprise it did not arrived with the new lens cap although the serial number was a newer one.

I took it for an assignment and start to noticed that between the zoom range 90mm-110mm it produced some kind of a strange flare, well not a flare but more of an Halo. First I thought it could be something related to the front filter but since that is also a Canon Protect I thought it was a little odd and decided to test it without the filter on a new assignment.

That's what I did and for my surprise it produced the same Halo thing all over again :(

Tested with a friend's 70-200 L IS USM older model and none of his happened.

I started to scratch my head and ask for a replacement on the shop I bought it, they replace it in no time. The new one arrived with a different and newer serial number and this time with the new pinch lens cap.

So I guess this one should be in great conditions and since it had the new lens cap then I thought it would be a newer model, unfortunately it came with dust already deep inside the front lens, contacted the seller that informed me that this is somehow normal has it would be impossible to keep a little speck of dust out of while on manufacturing the lens (for me this has to do with lower quality control on manufacturing) and I never thought of buying a lens that came already with free dust inside.

Anyway, after a couple of tests the lens came with the same problem and this one with even worst than my previous one. When you point it to a bright backlight light situation it creates this horrible flares either on the left/right/up/down side of the lens and always at the same mm, that's between 90mm and 110mm and when zooming slowly at those positions the effect of that reflection ruins completely the photo.

I decided to investigate the problem, has I never had such a problem on my previous six 70-200 lens I had in the past neither I've heard anyone complaining of something of this kind, either photo or video.

So this what I did to test the lens out with Lens Hood on it.

1) Grab a flash light
2) Put the flash light in front of the lens
3) Zoom in and out slowly between 90mm and 110mm

Then check if you got the results I show in the images below.

It's very subtle the effect on the right and left side. This is because the lens that I have at the moment is not too evident on the halo effect, but on previous one's I had this was a quick way to detect it and has you can see it's still there. It is normal that the lens creates the Flare effect but not this halo thing.

So I decided to investigate and tried to find out why this halo reflection occurs and I got to the conclusion that has to do with a inner black part that is reflecting back the light. This part should be completely black to avoid any kind of reflection but instead is a dark grey that when light hits it it creates that halo reflection with the lines.

Let me show you what I'm talking about...

Is this piece inside the lens, just look how bright it is under the lamp light.

As you can see I got a lamp above the lens and that inner piece is reflecting back the light as showed in the red arrows.

If you take a closer look it's reflecting all the light that enters the lens and that will reflect back and back in again while zooming the lens between 90mm and 110mm that's when the blades cross.

Let me show you some good example of the fantastic photo you can grab with this NORMAL Canon effect. I call this NORMAL has Canon replied me that this is a NORMAL thing this lens produces.

Enjoy the photos with this new effect...

The videos below (with no audio due to copyright issues) were recorded while on assignment for a client with full front stage access with 70-200 f.2.8 L IS USM II with it's lens hood on it (as I never use any of my lens without the lens hood) with a 5D MarkIII, that allow me to capture on movie the problem I'm having with this lens that Canon refuses to acknowledge the problem.

One example of the halo problem caught on video that occurs every time you have a back light situation. This would be either on the right side or left just depends on where the lens is pointing at and does nothing to do with normal and typical lens flare that could be produce in situations like this.

Here is another example of the halos produced by the lens when pointed at bright lighting situations where you cannot avoid and if you need to zoom in you will get horrible lens reflections.

And another example...

I have already replaced mine for 3 other with the same problem (all of them completely new).

Contacted Canon Germany and was informed this was not a malfunction it was a NORMAL procedure with this lens under this lighting condition as per information of Canon Inc. Tokyo.

Strange I have never had this before on many of my older 70-200 only with the new ones that were recently manufactured with the new pinch lens cap, so I guess this could be somehow related to bad control quality issues due to rush sales and market demand for this lens.

Check if yours have this problem and report back.

This usually happens between 90mm and 110mm range in back light situations. This also mess with photos as they all come with this halo problem either on right or left and if you slowly zoom in and out will get critical ruining your photo and maybe even make you loose a couple of clients.

Here goes the serials of the ones I had so far with this exact same problem:

- 9420006293
- 0330001231
- 0120004900
- 6150005393 (new v.2 lens from 2018 with same problem)

At the moment I'm using one with this problem has Canon refuses to acknowledge the problem and replacing it with a non defective one... Hey!!! but it looks like they no longer produce such a fine 70-200 L IS USM II lens... so we're screwed :(

Leave your comments and share this if you feel you've been cheated by Canon on such an expensive lens... also report the problem to Canon maybe they will address this in the future upgrade of this lens.

Hope this helps someone with the same problems!!

Test yours ASAP and if you also find that your lens produces such thing please report it here with serial number so we can deal with Canon, the more reports the better so they could gives us a solution on this problem in such an expensive lens. 

DIY Photography got some interest comments in it's page, have a look.

--//-- Update 12-09-2013 --//--

I've tried today this same setup with my older 70-200 L IS USM II, serial 119011,  that I had sold to a friend and was bought on the same supplier as the ones that are coming with this problem but it did not produce this kind of problem.

Sent also today a personal email to Mike Owen (Canon UK), Guido Krebs (Canon Germany) and Jose Antas (Canon Portugal) talking about this all mess and will report back when I got some more answers about this. 

Reported this to several lens rental houses in the UK, USA, Australia, Germany and France, some have replied saying that none of their costumers report this on the 70-200 L IS USM II that were rented.

Meanwhile test yours to see if you also got any of this problems and report them here.

We are much strong if we are all together!!

--//-- --//--


--//-- Update 25-09-2013 --//--

Got email from Canon Portugal with a great answer to this problem. And unfortunately so far nothing new... checkt it out.

Estimado Sr. Rui Leal,

Agradecemos o seu contacto e a questão colocada aos nossos serviços relativos à sua nova EF 70-200 2.8L IS U II.

Lamentamos que a sua nova objetiva não esteja a corresponder às suas expectativas.

Informamos que após análise técnica ao modelo em questão, não foi detetado nenhum defeito de fabrico no mesmo. A situação reportada não se trata de um defeito do produto, mas sim de uma limitação, que eventualmente poderá ocorrer em situações raras e apenas na conjugação de vários fatores.

Certos da sua melhor atenção.

Com os melhores cumprimentos,

	Luis Sintra RCC - CIG Service Country Coordinator Marketing (CIG Service) Canon Portugal, S.A.

Translation:

Dear Mr. Rui Leal,

Thank you for your question and contact to our services related to your new EF 70-200 2.8L IS U II.
 
Sorry that your new objective is not meeting your expectations.

Please be advised that after technical analysis to the model in question, was not detected any manufacture defect. The situation reported it is not a product defect, but rather a limitation which may possibly occur in rare instances and only on the combination of several factors.

Grateful for your best attention.

Yours faithfully,

Leave to your attention to comment a spread the word around on this very serious lens problem that Canon keeps ignoring. Thanks

--//-- --//--  

--//-- Update 30-10-2013 --//--

No more news from Canon about this problem. They keep insisting it's a normal procedure of the lens and that it should work like this.

Apparently this only affects the full frame sensors has they cover a larger area of the lens. Never happened to me before on my previous versions of this lens.

So the best and only way that Canon have is to say that this is a normal thing so they don't have to recall all their defective lens.

Shame on Canon support and German CPS service center.

Canon, Thank God this is a normal lens feature ;)

--//-- --//-- 

--//-- Last Update 04-2018 --//--

Got a new 70-200 f2.8 L IS USM II serial 6150005393 it has the same problem after all these years they still did not bother to silently fix this. It's a shame for such an expensive lens!

 --//-- --//-- 

--//-- Last Update 06-2019 --//--

Got the new 70-200 f/2.8 L IS USM III serial 761000601 and apparently this lens did not only got the new white color (that apparently does not look as white as people have named it, well at least my version), noticed some improvements on the IS stabilisation system (not much but is sound more smooth and lens noisier and now when you shake the lens you can see it stabilising well it's not much and can't be measured in stops but something has changed and they did not tell us about), noticed the lens is sharper at the corners just like the new 24-70 USM II and finally the new lens coat that I believe this is what makes the difference after all. Tested it under heavy controlled light environment and even pointed a flashlight to it, like I did on previous models, and now you got this nice flare as it was supposed to. THANK YOU Canon finally after all these years you got it!

Do not know if this would be something to upgrade your old 70-200 f/2.8 L IS USM II but for me this was definitely the best thing that happened in a long time and only for this, for me personally, it's a well deserved update for sure.


 --//-- --//--